DNKa Acryl Gel 08 Sand, tube, 30 ml

Acryl Gel is a versatile material that allows easy modeling on forms or tips, providing a very natural look and correcting the architecture of natural nails. With this product, you can easily strengthen and repair nails, as well as fix damaged edges or cracks. Thanks to its soft, self-leveling consistency, this material is easy to work with and reduces the need for excessive filing. It spreads easily over the surface with a soft brush and a special liquid, and does not cause burning during curing. After curing, it leaves a slight sticky layer. The collection includes the 8 most popular shades:

1) Perform standard nail preparation: remove the previous coating, buff the surface, shape the nails as desired, and perform a manicure.
2) Apply DNKa' Ultrabond, an acid-free primer for better adhesion.
3) Apply a layer of DNKa' Rubber/Fibre Base using rubbing motions. Cure in a UV lamp for 1 minute, in an LED/hybrid lamp for 30 seconds.
4) Using a spatula or an orange stick, take the required amount of DNKa' Acryl Gel and place it on the nail.
5) With a brush soaked in degreaser, spread the material over the nail plate using smoothing motions until it is perfectly smooth. If necessary, wipe excess liquid from the brush with a lint-free or paper tissue.
6) Cure in a UV lamp for 2 minutes, LED/hybrid lamp for 60 seconds. Remove the dispersion layer with a degreaser.
7) If necessary, file. After that, the nail is ready for DNKa' Cover Base / DNKa' Builder Gel / DNKa' Gel Polish or DNKa' Top.
8) Be sure to file the nail from the middle. It is enough to trim even 1 mm for this coating to look perfect.